What sizes, thicknesses and finishes are available in decorative panels?
Short Answer
Material Depot stocks panels in a wide range of sizes, thicknesses and finishes to fit any wall and design.
Typical SIZES:
1. Louvers (fluted panels) - usually 2400x300 mm or 2900x300 mm strips; some 600 mm wide.
2. 3D wall panels - 500x500 mm, 600x600 mm tiles; or larger 1200x600 mm sheets.
3. Decorative wall panels - 1220x2440 mm large sheets (the standard '4x8 ft' panel).
4. Exterior WPC panels - 2900x150 mm planks or larger sheets.
5. PU stone panels - 600x300 mm to 1200x600 mm.
6. Acoustic panels - 600x600 mm tiles or 600x2400 mm sheets.
7. Alabaster sheets - 1200x600 mm to 2400x1200 mm.
Typical THICKNESSES:
1. Louvers: 12-22 mm including back base.
2. 3D wall panels: 18-30 mm at the relief peaks.
3. Decorative wall panels: 3-8 mm.
4. WPC: 8-12 mm.
5. PU stone: 15-25 mm.
6. Acoustic: 9-25 mm.
FINISHES:
Wood (matte / glossy / textured), stone, marble, solid colours, fabric-look, leather-look, metallic (brass/copper/oxidised), 3D relief, embossed, patterned, rustic, cement-look, geometric. Over 15 distinct finish families across 6,500+ SKUs.
Typical SIZES:
1. Louvers (fluted panels) - usually 2400x300 mm or 2900x300 mm strips; some 600 mm wide.
2. 3D wall panels - 500x500 mm, 600x600 mm tiles; or larger 1200x600 mm sheets.
3. Decorative wall panels - 1220x2440 mm large sheets (the standard '4x8 ft' panel).
4. Exterior WPC panels - 2900x150 mm planks or larger sheets.
5. PU stone panels - 600x300 mm to 1200x600 mm.
6. Acoustic panels - 600x600 mm tiles or 600x2400 mm sheets.
7. Alabaster sheets - 1200x600 mm to 2400x1200 mm.
Typical THICKNESSES:
1. Louvers: 12-22 mm including back base.
2. 3D wall panels: 18-30 mm at the relief peaks.
3. Decorative wall panels: 3-8 mm.
4. WPC: 8-12 mm.
5. PU stone: 15-25 mm.
6. Acoustic: 9-25 mm.
FINISHES:
Wood (matte / glossy / textured), stone, marble, solid colours, fabric-look, leather-look, metallic (brass/copper/oxidised), 3D relief, embossed, patterned, rustic, cement-look, geometric. Over 15 distinct finish families across 6,500+ SKUs.
Detailed Explanation
Material Depot stocks decorative panels in a wide range of sizes, thicknesses and finishes to fit any wall, design and application. The right size to choose depends mostly on the sub-category - each panel type has its own standard sizes shaped by how it's manufactured and installed.
Typical SIZES by sub-category:
1. Louvers / fluted panels / rafters - the most common format is long vertical strips:
• 2400x300 mm (8 ft x 1 ft) - the standard
• 2900x300 mm - slightly longer
• 600 mm wide variants for shorter walls
• Custom lengths available on request
These are designed to run floor-to-ceiling without joins on most walls.
2. 3D wall panels - typically modular tiles:
• 500x500 mm or 600x600 mm individual tiles (tile up across a wall)
• Larger 1200x600 mm sheets for fewer joints
• Plug-together hexagonal or geometric pieces
3. Decorative wall panels - large flat sheets:
• 1220x2440 mm (the standard 4x8 ft panel) - covers a typical wall in 2-3 sheets
• 600x600 mm tile variants
4. Exterior WPC panels - planks and panels:
• 2900x150 mm planks (the WPC plank standard)
• 1200x600 mm panels
• Specialty profiles for soffit and facade
5. PU Stone panels - modular tile format:
• 600x300 mm or 600x400 mm (the typical 'brick-look' tile)
• 1200x600 mm slab format
6. Acoustic panels:
• 600x600 mm tiles (for grid-system ceilings)
• 600x2400 mm wall panels
• Custom shapes for designer feature walls
7. Alabaster sheets - large-format for hero installations:
• 1200x600 mm
• 2400x1200 mm
Typical THICKNESSES:
1. Louvers: 12-22 mm including the backing strip (the visible flute height is 8-18 mm).
2. 3D wall panels: 18-30 mm at the deepest relief peaks (the visible depth - what creates the shadow).
3. Decorative wall panels: 3-8 mm (these are thin flat sheets).
4. Exterior WPC: 8-12 mm for cladding.
5. PU Stone: 15-25 mm - the depth gives the realistic stone look.
6. Acoustic: 9-25 mm (the thicker, the better the absorption).
7. Alabaster: 8-12 mm.
FINISHES - over 15 distinct families across 6,500+ SKUs:
1. WOOD finishes (largest category - 2,400+ SKUs):
• Matte wood-grain (walnut, smoked oak, washed oak, teak, weathered)
• Glossy wood
• Textured wood with real grain feel
2. STONE finishes:
• Slate, sandstone, ledger stone, cobble, river stone
• Brick-look (red, cream, weathered)
3. MARBLE finishes (900+ SKUs):
• Calcutta, Statuario, Carrara, beige marble, deep green marble, black marble
4. SOLID COLOURS:
• Plain matte (cream, sage, charcoal, terracotta, deep green, navy, black)
• Solid glossy
• Textured solids (cement, concrete-look, fabric-finish solids)
5. PATTERNED (1,000+ SKUs):
• Geometric prints
• Floral and botanical
• Abstract designer prints
6. EMBOSSED / 3D RELIEF:
• Wave, hexagonal, brick, diamond, organic curves
7. METALLIC:
• Brushed brass, copper, oxidised steel, rose gold
8. SPECIALTY:
• Fabric-look, leather-look, cement-look, rustic, weathered
Visit our Experience Centre to see all sizes and finishes in person, or use the filters on materialdepot.com/panels to narrow down by size, thickness, finish and look.
Typical SIZES by sub-category:
1. Louvers / fluted panels / rafters - the most common format is long vertical strips:
• 2400x300 mm (8 ft x 1 ft) - the standard
• 2900x300 mm - slightly longer
• 600 mm wide variants for shorter walls
• Custom lengths available on request
These are designed to run floor-to-ceiling without joins on most walls.
2. 3D wall panels - typically modular tiles:
• 500x500 mm or 600x600 mm individual tiles (tile up across a wall)
• Larger 1200x600 mm sheets for fewer joints
• Plug-together hexagonal or geometric pieces
3. Decorative wall panels - large flat sheets:
• 1220x2440 mm (the standard 4x8 ft panel) - covers a typical wall in 2-3 sheets
• 600x600 mm tile variants
4. Exterior WPC panels - planks and panels:
• 2900x150 mm planks (the WPC plank standard)
• 1200x600 mm panels
• Specialty profiles for soffit and facade
5. PU Stone panels - modular tile format:
• 600x300 mm or 600x400 mm (the typical 'brick-look' tile)
• 1200x600 mm slab format
6. Acoustic panels:
• 600x600 mm tiles (for grid-system ceilings)
• 600x2400 mm wall panels
• Custom shapes for designer feature walls
7. Alabaster sheets - large-format for hero installations:
• 1200x600 mm
• 2400x1200 mm
Typical THICKNESSES:
1. Louvers: 12-22 mm including the backing strip (the visible flute height is 8-18 mm).
2. 3D wall panels: 18-30 mm at the deepest relief peaks (the visible depth - what creates the shadow).
3. Decorative wall panels: 3-8 mm (these are thin flat sheets).
4. Exterior WPC: 8-12 mm for cladding.
5. PU Stone: 15-25 mm - the depth gives the realistic stone look.
6. Acoustic: 9-25 mm (the thicker, the better the absorption).
7. Alabaster: 8-12 mm.
FINISHES - over 15 distinct families across 6,500+ SKUs:
1. WOOD finishes (largest category - 2,400+ SKUs):
• Matte wood-grain (walnut, smoked oak, washed oak, teak, weathered)
• Glossy wood
• Textured wood with real grain feel
2. STONE finishes:
• Slate, sandstone, ledger stone, cobble, river stone
• Brick-look (red, cream, weathered)
3. MARBLE finishes (900+ SKUs):
• Calcutta, Statuario, Carrara, beige marble, deep green marble, black marble
4. SOLID COLOURS:
• Plain matte (cream, sage, charcoal, terracotta, deep green, navy, black)
• Solid glossy
• Textured solids (cement, concrete-look, fabric-finish solids)
5. PATTERNED (1,000+ SKUs):
• Geometric prints
• Floral and botanical
• Abstract designer prints
6. EMBOSSED / 3D RELIEF:
• Wave, hexagonal, brick, diamond, organic curves
7. METALLIC:
• Brushed brass, copper, oxidised steel, rose gold
8. SPECIALTY:
• Fabric-look, leather-look, cement-look, rustic, weathered
Visit our Experience Centre to see all sizes and finishes in person, or use the filters on materialdepot.com/panels to narrow down by size, thickness, finish and look.
Shop on
Video Call
Video Call