Laminates

How do I choose / select the right laminate for my home?

Short Answer
Decide in five steps.
(1) Room: kitchen, wardrobe, TV unit, pooja, study? Each has different demands.
(2) Surface: vertical (shutter, wall) vs horizontal (countertop) vs hidden (interior).
(3) Thickness: 0.6-0.8 mm liner for hidden, 1 mm decorative for vertical, 1.5 mm for horizontal, 3-8 mm acrylic for premium gloss.
(4) Finish: matte (low-maintenance, premium), soft-touch (silky), gloss (luxe but high-maintenance), textured/fluted (on-trend depth), digital (wood/stone/cane realism).
(5) Colour: light for small rooms, warm for low-light, bold only on hero surfaces. ALWAYS order samples - a 2-inch swatch under your home's actual lighting beats every catalogue photo.

Detailed Explanation

Selecting a laminate is five decisions stacked together: room, surface, thickness, finish and colour.
Step 1 - Room: kitchen, wardrobe, TV unit, pooja, study, office? Each room has different demands (heat, water, abrasion, glare, lighting).
Step 2 - Surface type: vertical (shutters, side panels, walls) vs horizontal (countertops, table tops, shelves) vs hidden (inside cabinets, drawer interiors).
Step 3 - Thickness: 0.6-0.8 mm liner for hidden surfaces, 1 mm decorative for most visible vertical surfaces, 1.5 mm for high-impact horizontal (countertops), 3-8 mm acrylic for premium gloss shutter fronts.
Step 4 - Finish: matte (fingerprint-friendly, premium feel, dominant trend), soft-touch (silky, premium), gloss (luxurious but high-maintenance), textured/fluted/reeded (adds depth, on-trend right now), digital (hyper-realistic wood/stone/cane).
Step 5 - Colour: warm neutrals (cream, ivory, oak) for most surfaces, secondary tones (sage, walnut, terracotta) for variety, bold accents (black, brass, deep green) on a single hero surface.
Rules that prevent regret:
ALWAYS order samples (a real 2-inch swatch under your home's actual lighting beats every catalogue photo); always laminate both faces of a panel (decorative + liner) to prevent warping; stick to three colours total in a room (60% base, 30% secondary, 10% accent); and pick the highest finish you can afford on visible hero surfaces while saving budget on hidden interiors. When in doubt, visit a Material Depot store - every laminate is on display under proper lighting and our in-house designers will help you check that your shortlist works together before you commit.

More questions about Laminates

How does honeycomb panel backing improve the structural integrity of cane laminates?
A honeycomb panel is a sandwich of two thin skins around a hexagonal cellular core, which makes it remarkably stiff and strong for its weight. As a backing it keeps cane laminate rigid and flat so it won't flex or bow under load, absorbs and spreads out impacts, and stays dimensionally stable as temperature and humidity change. Because the panel is so light, you get this strength without making the furniture or wall element heavy - which is why it's favoured for large panels and spans.
What type of backing is recommended for cane laminates used in furniture design?
It depends on the piece and how it will be used, but the common choices are MDF, plywood, particle board, solid wood and metal frames. MDF gives a smooth, flat, stable base and is the everyday workhorse for cabinet fronts and furniture surfaces. Plywood is stronger and more moisture-tolerant, good where durability matters. Particle board is the budget option but the weakest and least long-lasting. Solid wood suits premium, natural-looking pieces, while aluminium or steel frames are used in modern or outdoor furniture that needs rigid structural support.
How does MDF backing enhance the durability of cane wall panels?
Cane on its own is flexible and easy to damage, so an MDF backing gives it a firm, even base that does most of the heavy lifting. The board keeps the panel from bending, twisting or sagging, holds the cane flat and evenly supported so it mounts securely to a wall, and shields the delicate natural fibres from knocks and everyday wear. With that support and protection, a cane wall panel keeps its shape and looks good for much longer. (For consistently damp areas, choose moisture-resistant MDF or plywood, as standard MDF doesn't tolerate prolonged humidity.)
Can I order samples before placing the full material order?
Yes. If you're unsure about the look and feel of a particular laminate, you can order a single piece, sheet or box to try it before committing to a larger quantity. You're also welcome to visit our Experience Center in Bangalore, where you can browse our full range of laminate catalogues in person. To place a sample order, call us on +91-8121523945 or message us on WhatsApp.
Can foam board be used as backing for lightweight cane panels?
Yes. Foam board is a good backing where keeping weight down matters - it's very light, so the finished cane panel is easy to handle, transport and install, which helps with ceilings and large wall areas. It's also easy to cut and shape, offers some thermal and acoustic insulation, and cushions the cane against knocks. Just note that foam board isn't as strong as MDF or plywood, so it suits decorative, low-load panels rather than structural ones, and you should check the specific board's moisture resistance if it will be used in a damp area.
How does self-adhesive backing simplify the installation of polygranite sheets?
A self-adhesive backing comes with the adhesive already applied under a peel-off liner, so fitting the sheet is largely a peel-and-press job - no separate glue to buy, mix or spread. That makes installation quicker and far less messy, and because the adhesive grips on contact you don't have to wait for anything to cure. It's forgiving to position during fitting, and once pressed down it holds firmly, including in moisture-prone spots like kitchens and bathrooms (provided the wall is clean, dry and smooth first).
Why is self-adhesive backing suitable for quick installation of cane laminates?
A self-adhesive backing comes pre-coated with adhesive that's protected by a peel-off liner, so installing the cane laminate is mostly a matter of peeling and pressing into place - no separate glue, mixing or special tools required. That makes the job faster, cleaner and well within reach of a confident DIYer, and because the adhesive grips on contact there's no waiting for glue to dry before you move on. Surfaces still need to be clean, dry and smooth for the bond to hold well.
Why is cardboard backing used for protecting polygranite sheets during transport?
Polygranite sheets are rigid but can chip, scratch or crack if knocked or flexed in transit, so a cardboard backing is added as cheap, effective protection. It cushions shocks and impacts during handling, puts a smooth barrier between the sheet and anything it's stacked against to prevent scratches, and stiffens the sheet so it doesn't bend on the journey. Cardboard is light, easy to cut to size and inexpensive, so it guards the sheets without adding much weight or cost.
View all questions →
Video Call Icon
Shop on
Video Call